How to view how many words I've yet to translate in a given document
Konuyu gönderen: Mariano Saab

Mariano Saab
Arjantin
Local time: 13:59
Üye (2013)
İspanyolca > İngilizce
+ ...
Jun 25, 2015

The subject pretty much sums it up. I know I can have memoQ base my progress on how many words a document has and what percentage of it I've translated, but is there a way to see how many WORDS I've yet to translate?

I'm using memoQ 2014 R2.

Thank you for your help.


Direct link Reply with quote
 

Katalin Horváth McClure  Identity Verified
Amerika Birleşik Devletleri
Local time: 12:59
Üye (2002)
İngilizce > Macarca
+ ...
If you know the percentage translated... Jun 25, 2015

When you look at the file list in your project, select the desired file. At the bottom of the screen MemoQ shows the total words in the document, and then the percentage translated (TR:xx%). You can select multiple files and then the total wordcount and overall completion percentage will show up.
If you know the wordcount and the % completed, it's easy to figure out how many words you still need to translate, no?


Direct link Reply with quote
 

Mariano Saab
Arjantin
Local time: 13:59
Üye (2013)
İspanyolca > İngilizce
+ ...
KONUYU BAŞLATAN
. Jun 25, 2015

Thanks. Yes it is easy and I can do the math but I was asking if I can see the exact number of words left instead of a percentage.

Direct link Reply with quote
 

Radian Yazynin  Identity Verified
Local time: 19:59
Üye (2004)
İngilizce > Rusça
+ ...
Or you may become a psychic :0 Jun 25, 2015

If seriously, this build doesn't offer such a feature. Hopefully, they at Kilgray will improve it soon.

Direct link Reply with quote
 
Charlie Bavington  Identity Verified
Local time: 17:59
Fransızca > İngilizce
Statistics Jun 25, 2015

I'm using an ancient version of memoQ and the "statistics" function does exactly that, and more besides. Presumably it's still to be found somewhere in more modern versions....

(If it isn't, that's another reason to stick with what I know!)


Direct link Reply with quote
 

Helena Chavarria  Identity Verified
İspanya
Local time: 18:59
Üye (2011)
İspanyolca > İngilizce
+ ...
I use a Word doc. Jun 25, 2015

I don't work with CAT tools but I always create a Word doc. especially for this reason. As I finish each paragraph, section or whatever, I just delete the corresponding fragment in the second document I created, eventually ending up with a blank page

I find it really useful for planning my time.


Direct link Reply with quote
 

Kathryn Britton
Birleşik Krallık
Local time: 17:59
Üye (2014)
İtalyanca > İngilizce
Statistics....where to find them Jun 25, 2015

Open your project, go into the Documents page (
in the navigation bar at the top), click on statistics. A window opens, in the top left choose active document or project and then click on 'calculate" in the top right corner ...easy peasy..


Direct link Reply with quote
 

Radian Yazynin  Identity Verified
Local time: 19:59
Üye (2004)
İngilizce > Rusça
+ ...
The question is Jun 26, 2015

Kathryn Britton wrote:
and then click on 'calculate" in the top right corner ...easy peasy..

How to display it at the bottom of the current window in which you are translating becuase the only option is to switch it between % and number of segments which are 'emptly'.
I do use Statistics but in case you use a project for ongoing translations with the same TM and dbase, where you delete ready files and import new ones, using this calculation method results in a long list of analysis data which you have to delete or it will be endless...

[Edited at 2015-06-26 04:36 GMT]


Direct link Reply with quote
 

Francesca Collodo  Identity Verified
Birleşik Krallık
Local time: 17:59
Üye (2012)
Almanca > İngilizce
+ ...
Agree. Jul 15, 2015

Radian Yazynin wrote:

Kathryn Britton wrote:
and then click on 'calculate" in the top right corner ...easy peasy..

How to display it at the bottom of the current window in which you are translating becuase the only option is to switch it between % and number of segments which are 'emptly'.
I do use Statistics but in case you use a project for ongoing translations with the same TM and dbase, where you delete ready files and import new ones, using this calculation method results in a long list of analysis data which you have to delete or it will be endless...

[Edited at 2015-06-26 04:36 GMT]

Why it can't have the same options as Trados, I do not know. %age is close to useless.


Direct link Reply with quote
 

Oliver Walter  Identity Verified
Birleşik Krallık
Local time: 17:59
Üye (2005)
Almanca > İngilizce
+ ...
Let Word count them Jul 15, 2015

A little similar to Helena (I don't use MemoQ):
1. Have a Word document containing the source text to be translated
2. Go to the relevant point in the document (I.e. if you type something, that's where it will happen)
3. Press Ctrl + Shift + End to select the text between that point and the end of the document
4. Use the word-count function to count the words in the selected text. In Word2000 it's the Word count function in the Tools menu. If no text is selected, the word count function counts the words in the whole document.
5. Or. press Ctrl + Shift + Home instead to select between that point and the start, to see how many words you've translated.
(6. Something similar is, I suppose, possible in other word processors.)

Oliver


[Edited at 2015-07-15 15:13 GMT]


Direct link Reply with quote
 
Jalapeno
Local time: 18:59
İngilizce > Almanca
Any improvement in Adriatic? Apr 19

This issue is one of my pet peeves with memoQ and one of the reasons why I much prefer Trados. However, a lot of my clients have recently switched to memoQ or are planning on doing so, so I'm trying to give memoQ more of a chance.

Is there any improvement regarding statistics in the latest version, "Adriatic"? Is there finally an option to show live wordcount statistics in the status bar while translating?

As others have said above, of course I can calculate the wordcount from the percentages. Or I could have a Word file open and delete the parts I have already translated. But both options are cumbersome and cost time. The word option also doesn't work if you often translate files with lots of repetitions spread randomly throughout the entire file.

In Trados, I can see at a glance how many words are untranslated, anytime. In memoQ it costs me a minute or more to run the Statistics task, which is extremely annoying.

I'm flabbergasted why such an essential and seemingly basic feature isn't included from the start.


Direct link Reply with quote
 

Stepan Konev  Identity Verified
Rusya Federasyonu
Local time: 19:59
İngilizce > Rusça
Are you there to translate or count? Apr 20

Excuse me guys, but I cannot understand what is the problem. Unlike Trados, with memoQ you can calculate statistics even "From cursor" to the end. Or select a portion of segments and calculate that selection. It takes seconds. Do you really need to know the satistics after each 15 seconds? Are you there to translate or to count?
I use both programs. Well, yes, Trados shows untranslated words. But in Trados terminology, "untraslated" means "unconfirmed". A 99% fuzzy match segment may contain a number of words, all of which are "untranslated". For example, if you have 20 words in a 99% fuzzy match segment, you will see all 20 words as "untranslated", even if you need to change just 1 word. So why do need you such confusing statistics at all?

With memoQ, I just launch the Statistics option, select "From cursor" and that is it! Once done, I see the real situation including all repetitions and different level fuzzy matches.

Even if you add and remove files within the same project (the way I always do), no problem at all. You can calculate the selected files you need within a project, or even selected segements within a file you need, or even more, selected segments within a number of selected files you need.

Just remeber: "untranslated" = "unconfirmed" (in Trados).
It says nothing about the real state of things.


[Edited at 2017-04-20 23:52 GMT]


Direct link Reply with quote
 


To report site rules violations or get help, contact a site moderator:


You can also contact site staff by submitting a support request »

How to view how many words I've yet to translate in a given document

Advanced search






TM-Town
Manage your TMs and Terms ... and boost your translation business

Are you ready for something fresh in the industry? TM-Town is a unique new site for you -- the freelance translator -- to store, manage and share translation memories (TMs) and glossaries...and potentially meet new clients on the basis of your prior work.

More info »
Déjà Vu X3
Try it, Love it

Find out why Déjà Vu is today the most flexible, customizable and user-friendly tool on the market. See the brand new features in action: *Completely redesigned user interface *Live Preview *Inline spell checking *Inline

More info »



Forums
  • All of ProZ.com
  • Terim arama
  • İşler
  • Forumlar
  • Multiple search